3/4'' CA20T Goyen Type Pulse Jet Diaphragm Valve For Dust Collector
Pulse valves (also called diaphragm valves) are the “switch” for compressed air in the dust clean blowing system of the pulse bag filter. It is used to control the release of air pulses in the cleaning cycle. When the dust collector control board starts the cleaning cycle, it sends an electrical signal to the solenoid valve, and then activates the pulse valve. Inside the pulse valve, the rubber diaphragm opens and closes to release the compressed air stored in the air header. At this time, the air enters the blowing pipe above the filter through the valve, and then enters the filter down to clean the filter bag.
Technical Data of T Series Pulse Jet Valves:
| Model No | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| Diaphragm Number | | |
| Working pressure | 0.35 to 0.85 MPa (5 to 125 PSI) |
| Voltage | 24VDC, 24VAC, 110VAC, 220VAC |
| Diaphragm Material | |
| Body Material | |
| Valve Structure | Right Angle (Outlet is at 90° to Inlet), Threaded Port |
Ordering Code of T Series Pulse Jet Valve:
Main Dimension of CA20T Pulse Jet Valve:
Video of CA20T Pulse Jet Valve:
More Goyen Type Pulse Valves for you to choose:
 |  |  |  |
| T Series | DD Series | FS Series | MM Series |
 |  |  |  |
| RCA Series | Solenoid Coil | Solenoid Armature | Diaphragm |
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
Product Tags:
|
|
3/4'' CA20T Goyen Type Pulse Jet Diaphragm Valve For Dust Collector Images
|
