4V320-08 1/4'' BSPT AirTAC Type Pneumatic Solenoid Valve 5/2 Way Directional Control DC24V
4V series AirTAC type pneumatic solenoid valve for air, two or three positions, five-way-5/2 (3) -way, double solenoid valve, can be used for voltage DC 12V, DC 24V, AC 110V and AC 220 Volt, Pilot Valve-Operating Mode, Port Size M5 × 0.8, Rc 1/8 ", 1/4", 3/8 "for your choice, fast and safe opening / closing. High reliability and low price. 4V Series AirTAC type solenoid valve is used as a directional control component to change the direction of the working medium to drive the actuator assembly, usually through a cylinder to achieve cyclic movement.
YouTube video of 4V320-08 AirTAC Type 5/2 Way Pneumatic Solenoid Valve:
Main dimension of 4V320-08 G1/4'' Directional Control Solenoid Air Valve:
Details enlargement of 4V320-08 Double Solenoid Air Control Solenoid Valve:
Specifications of 4V300 Series AirTAC Type Electric Control Solenoid Valves:
| Model | | 4V330C-08 4V330E-08 4V330P-08 | | 4V330C-10 4V330E-10 4V330P-10 |
| Fluid | Air(to be filtered by 40 μ m filter element) |
| Acting | Internal pilot or external pilot |
| Port Size | | In=Out=3/8'' Exhaust=1/4'' |
| Orifice Size | | | | |
| Valve Type | | | | |
| Operating Pressure | |
| Proof Pressure | |
| Working Temperature | |
| Material of Body | |
| Max. frequency | | | | |
Factory production of 4V Series AirTAC Type Pneumatic Solenoid Valves:
Working principle of pneumatic solenoid valve:
The solenoid valve is often used to control hydraulic cylinder or pneumatic cylinder. One of the working holes of the 4/2-way or 5/2-way single solenoid valve is a normally open working hole. When the solenoid valve is in the power-off state, the medium directly enters the working hole B from the air (liquid) inlet hole P, which pushes the hydraulic cylinder or the pneumatic piston to the C end. Solenoid valve for hydraulic or pneumatic cylinder,wWhen the solenoid valve is powered on, the direct-acting 4/2-way or 5/2-way solenoid valve directly lifts the iron core valve stem to close the working hole B. The gas or liquid of the pressure source flows to the working hole A, to make the piston of the pneumatic (hydraulic) cylinder push to the D end. The direct-acting solenoid valve can be used universally for air and liquid.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
Product Tags:
|
|
4V320-08 1/4" BSPT AirTAC Type Pneumatic Solenoid Valve 5/2 Way Directional Control DC24V Images
|
